i have a case 1694 the back arms are slow to come up change oil and cleaned filters wont come up
If the hydraulic cylinders aren't leaking bad and the rest of the cylinders work normally, then this sounds more like a control valve problem. Either the valves aren't opening enough to allow the fluid to pressurize the cylinder, or the linkage is out of whack.
I would suspect the control valves are the problem if none of the hoses or line are restricted. I'm not familiar with the line routing of your Case, but it wouldn't seem as if they would both be restricted at the same time unless they were both fed fluid from a single valve.
You may be able to swap a hydraulic line from a working control valve and see if the arms raise then. If so, the control valves are at fault. Hope this helps!
by GA Anderson3 months ago
Admittedly I am a Constitution admirer. I think it is one of the most brilliantly created documents ever. In my mind, the Constitution is the frame that the house that is America is built onj.There has been...
by Cindy Vine6 years ago
Should guns be restricted to military, police and security guards?
by Marian L5 years ago
Why do Americans think their right to bear arms is more important than people's lives?
by Alem Belton3 years ago
Okay so another guy dresses up like The Joker and kills people. I will resist the urge to state how bizarre and coincidental that is and stick to the question.The media is intent on showing Americans all the LEGAL...
Copyright © 2018 HubPages Inc. and respective owners.
Other product and company names shown may be trademarks of their respective owners.
HubPages® is a registered Service Mark of HubPages, Inc.
HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.