Copy/Paste

1. 60

   solardaveposted 16 years ago

   I write my articles in word and then I copy/paste them in. Hub won't let me do this. Is there a way around it?

   replyreport
   1. 79

      ngurecoposted 16 years agoin reply to this

      1. copy into wordpad then into hub editor
      or
      2. copy into hub editor, save, edit again, save.
      
      It works with me.

      replyreport
   2. 80

      sunforgedposted 16 years agoin reply to this

      are you getting a little prompt that says your browsers security settings wont allow you to paste?
      
      If so, just use the alternate way of pasting than you are currently trying (if your trying to right click and paste then press "ctrl + v " or vice versa.

      replyreport
2. 71

   WHoArtNowposted 16 years ago

   I do the same thing, means I can write while off line.
   
   Press the little HTML button, then paste in there, click clean up HTML and your done, should work a treat!

   replyreport
3. 61

   JYOTI KOTHARIposted 16 years ago

   I do it in microsoft word and paste it in hub pages. No problem. I did it even yesterday.
   
      Jyoti Kothari

   replyreport
4. 83

   bill komissaroffposted 16 years ago

   I use Word as well.  No problems so far.  Maybe you can be more specific.  What exactly won't work?

   replyreport
5. 81

   DonnaCSmithposted 16 years ago

   I haven't had a problem copying my Word documents to my hubs, either.

   replyreport
6. 55

   Dame Scribeposted 16 years ago

   I had problems with Word also n just copy n paste over to Notepad then to HP. Maybe that will help?

   replyreport
7. 60

   spudsposted 16 years ago

   I write my content in word and have no problems copy and pasting into my hub text module.

   replyreport
8. 60

   solardaveposted 16 years ago

   IT MUST BE ME. It usually is. Thanks everyone.

   replyreport
   1. 66

      Antidoteposted 16 years agoin reply to this

      I've had these same problems, so I've just begun typing my Hubs out in Notepad.  I agree that it's annoying that the text goes on FOREVER, but if you click "Format" and then "Word Wrap" it'll fix that problem.  Works great for me.  Hopefully this helped you out!

      replyreport