I have a GE gas dryer, DWXR483GB1WW, that when I turn it on it runs for about a minute or two...
then the flame goes out. I changed the coils, but still having the same problem. It seems like it needs to cool down before I can get it to light again. Then after a minute the flame goes out.
check your exhaust system if the flame goes on and fills the whole tube assembly instead of shooting down the tube. It could be turning off the safety thermostat.
by ladyjane16 years ago
What modern appliance would have been hard to live without at the turn of the 20th century?
by tammyjo7 years ago
my gas dryer will heat one time then wont heat again.is it worth fixing
by Tglick6 years ago
My dryer runs but blows only cold air, could this be a fuse issue?It is not my heating element.Will the fuse only control the heat? My dryer runs and blows only cold air. Could that be a fuse issue?
by GGobblin7 years ago
LG Gas Dryer Won't even Light - URGENT !Ignitor Glows for maybe 10 seconds and fades, glows again and fades. No gas seems to be released. Cleaned unit, reset thermal breaker.Seems like either the ignitor is not staying...
by Sam Kear4 years ago
Should you turn off the pilot light for a gas fireplace in the off season?Is there any gas savings or maintenance concerns?
by James13744 months ago
I cleaned my gas furnace sensor and it runs fine but when I put the door back on it wants to shutoff
Copyright © 2018 HubPages Inc. and respective owners.
Other product and company names shown may be trademarks of their respective owners.
HubPages® is a registered Service Mark of HubPages, Inc.