just had brakes changed and rotors turned on 2005 dodge ram 1500,driver side caliper sticking,...
then replaced it and new one is also sticking what could be problem?
You should take the caliper off and clean it up. Make sure the pistons are clean.
What makes you think the caliper is sticking? You could have a pinched line or a bad master cylinder, also, your brake light switch could be out of adjustment, but that would usually affect all 4 wheels. One other question, when you replaced the caliper, did it bleed ok?
by KKalmes7 years ago
I have been quoted $890 and $690 for new pads and rotors all around on my 2000 Volvo S40, too much?Has anyone had good experiences with the Midas, Pep Boys, retail/service tire shops?The dealerships are outrageous...
by tcfresh8 years ago
Hey wats up, my question today is i recently changed my brakes and rotors on my 2003 lancer?reason for doing so was i could hear grinding or some noise of rubbing so i changed an installed new. after doing so i thought...
by Motherbynature23 months ago
How do I stop my brakes from squeaking?The brakes on my van are good and are less than a year old. The first time it rained after they were changed, they started squeaking intermittently. Now they actually...
Copyright © 2018 HubPages Inc. and respective owners.
Other product and company names shown may be trademarks of their respective owners.
HubPages® is a registered Service Mark of HubPages, Inc.
HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.