NEED HELP!

1. 61

   NAZZKHANposted 6 years ago

   Hey everyone .
   
   So I have just posted my first article and I am really enjoying writing .
   
   But here is my problem, I have already edited my article twice and followed the little criteria box at the top of the page when writing my article and it keeps coming back as not cleared .
   
   It really difficult because hubpages does not tell you exactly where you have gone wrong so that you can fix it and learn from your mistake because at this moment in time I am taking shots in the dark trying to figure out where i went wrong.
   
   So now I am really stuck and I need some guidance with regards to where I have went wrong.
   
   I would really appreciate if a more experienced Hubber could help me out so that I can move forward and write more articles and not have to keep going through the same issues over and over again.
   
   Thank you so much .

   replyreport
   1. 97

      theraggededgeposted 6 years agoin reply to this

      Once you have published, just sit back and wait. It has to go through the Quality Assessment Process. If you edit again after publishing, it'll go back to the end of the queue. Articles take anywhere from a few hours to a couple of days to be approved.
      
      Check back on your account page and the status will be indicated by the icon on the far right.
      
      https://hubpages.com/my/hubs/stats
      
      https://hubpageshelp.com/standards/Lear … tured-Hubs
      
      Edit: If you are referring to 'coming back' as the email from HP, you'll find a link at the bottom that you can click on. It will create a forum thread here with a special link that hubbers can access in order to give you some suggestions.

      replyreport
      1. 61

         NAZZKHANposted 6 years agoin reply to this

         Thank you so much.
         
         Does this happen even after HP tells you that it has not been cleared?
         And the status is "draft".

         replyreport
         1. 97

            theraggededgeposted 6 years agoin reply to this

            If they contact you, there will be a link to post for 'help from the community'. Click it.

            replyreport
            1. 61

               NAZZKHANposted 6 years agoin reply to this

               Thats what I did and I came to this forum.
               
               Cos they said my article was not cleared to be published because it did not pass the quality test.
               I just need to know how to change that, or see where I went wrong

               replyreport
               1. 97

                  theraggededgeposted 6 years agoin reply to this

                  No, you are not clicking on the correct link. I can't be 100% sure where it is as I've never seen it. All I know is that you click on it and it generates an automatic post titled, "I need feedback on my article..." Go look again.

                  replyreport
                  1. 61

                     NAZZKHANposted 6 years agoin reply to this

                     Thanks much..I will definitely do that and get back to you.

                     replyreport
2. 70

   Miebakagh57posted 6 years ago

   Welcome to hubpages.
   I do not understand the little criteria box you are talking, or I would help you.
   However, hupages always help when you go wrong.
   Could you please tell us the location of the box?

   replyreport