jump to last post 1-1 of 1 discussions (4 posts)

Instructions on Hubs

  1. Anita Hasch profile image80
    Anita Haschposted 8 months ago

    Sorry I asked this a long time ago but did not make a note of it. How do I make the instructions on my hub smaller so that I can read it. Only half show.

    1. theraggededge profile image95
      theraggededgeposted 8 months ago in reply to this

      Hi Anita,

      Not sure what instructions you are referring to, but try pressing Ctrl and the minus sign key at the same time. This will reduce the size of the page you are looking at so you can see everything on the page.

      1. Anita Hasch profile image80
        Anita Haschposted 8 months ago in reply to this

        Thank you. I will make a note of it so I don't have to ask again.

    2. wilderness profile image95
      wildernessposted 8 months ago in reply to this

      That's not always a good idea, at least when writing a hub.  As my eyes got worse, I used the solution from raggededge to increase the size of print, pics, etc. and everything was great...until I used someone else's computer to look at a hub and found the appearance to be terrible.  The appearance of the pages, that I had worked so carefully to make pleasing, was absolutely horrible when viewed on a screen with the size set to a more normal, common, figure.

      Just something to consider.

 
working