How to install a dimmer-light switch.
For mood lighting at home.
Dimmer switch, Some even come with a remote! First find the breaker and flip the switch, cutting power to the switch. remove the old standard switch with a screw driver and some care. Black wire is the hot line, white is the neutral, green is ground. The dimmer switch will have the proper markings on the back plate, match up the corresponding wires, usually you will push the copper lines into the back of the switch so no screwing the lines onto a connection plate. ground is to protect the surface so find the green screw and once you replace the switch with the two screws into the wall, add cover plate and you have your " mood lighting" dimmer switch. Good luck and enjoy.
by Elizabeth 2 years ago
If God is like a light switch in a dark room, why is it so hard to show it to a non-believer?This appeared in a forum post recently:"They are led to stand before the doorstep of a dark room ~ and encouraged to discover if there is any light-switch ('God') inside it. The only way to find out ~...
by God shet 3 years ago
Almost every atheist has the awareness of a (very interesting) silver-bullet. Whenever anyone says: I know God exists ~ they jump up from their seat and proclaim this, with a domineering pose: "What is your evidence?" If you answer: "I have no evidence to prove that...
by jenniferrpovey 6 years ago
150W lamp with dimmer switch - what to do?I have a floor lamp which has a 150W bulb with a dimmer. Well, incandescent 150W bulbs are no longer legal to be sold. I was not able to stock up on them because they were nearly impossible to get even BEFORE they were phased out. Using a non-dimmable CFL...
|HubPages Device ID|
|Login||This is necessary to sign in to the HubPages Service.|
|HubPages Google Analytics|
|HubPages Traffic Pixel|
|Google Hosted Libraries|
|Google AdSense Host API|
|Conversion Tracking Pixels|
|Author Google Analytics|
|Amazon Tracking Pixel|