I have done two hubs but every time i try to publish them i get the same Email saying "it did not pass the Quality Assessment Process. improve the Hub so that it meets our quality standards. To graduate from Boot Camp, you must publish at least five Featured Hubs."
i wrote those hubs my self ,i did the reading for "HubPages' Quality Assessment Process," many times and modified my hubs many times but the results are same ,should i wait till 5 hubs then i will be allowed to publish them ???
can any one review them please and tell me whats wrong or missing ,here it's the links for my hubs
http://rcmodels.hubpages.com/hub/Build- … odel-Plane
http://rcmodels.hubpages.com/hub/Basic- … -Explained
I read your hubs, the content is good but they have formatting issues. For example, you have changed paragraphs without completing sentences. There are grammatical errors as well. Work upon them and resubmit your hubs.
Hi, welcome to HP,
The quality assessment process is there to ensure that your writing is up to "standard".
However a quick look at one of your hubs which appears to be published shows writing such as;
"I'm Flying Radio Control Models since 90's ,we had AM radios back then ,i still remember my shiny Futaba Attack 4 and my high wing trainer with Osmax 40,building such plane from balsa was time consuming ,attaching a nitro engine in the front made us do amazing reinforcement ,no one indeed wanted the Engine running after him in the ground "
This is not good English! You need to read what you write out loud to see how it sounds and maybe try going on an English writing course. Best of luck with your hubs.
Hi RCModels, LeanMan is 100% correct, "Read what you write out loud...". Hubpages won't publish a hub if it's not written, at least, with some care in mind. I know you can write better than that. Your spelling is perfect and your story line is interesting. Focus on punctuation and run-on sentences. You can also copy what you've written and plug it into Google translate (English to English) and hear how it sounds when the narrator reads it. You'll be surprised at what your words sound like.
By the way I like your profile background so much ,is it a Mustang ?
Thank you all for your support ,really appreciate your help .
Have a nice day .
A lot of your problems will be resolved when you punctuated in a conventional way.
Cause when using other kind of paints like the one used on painting cars ,it will destroy the foam and make it melt .,
Because when using other kind of paints like the ones used to paint cars, it will destroy the foam and make it melt.
Start each sentence with a capital letter, end with a period, have no space before the comma and one space after.
Otherwise your content looks pretty good.
First word of sentence is always capitalized. Other words begin with small letters, as in "We Read Every day and some times". It should be, "We read every day and some times". When you say "i" - meaning yourself - you always capitalize it, "I". You always end your sentences with a period.
At last my hubs were published ,I want to thank every one helped me ,wish you all best of luck .
@RCModels I am facing the similar prob, the first hub I published ,I got a notification saying "duplicate " where as it was mine , considering I had shared the same on my blog I unpublished it , today I created another hub but its pending approval....could you tell me pl the criteria one has to follow here ? thanx
Don't worry 'pending approval' means your hub is being evaluated by staff members. The process normally takes 6-12 hours. Once approved, your hub will be published.
Hello Alkanarula,, as Vineet said wait till the evaluation finished,if it was refused, try to follow the instructions in the previews replies, by the way,if you already published your hub here previously in your blog,I think you must delete it first and wait for 8 hours till the crawler identify the deletion process.
Thank you Vineet , but it got published and and became the editor's pick...I am so very thrilled ...My very 1st hub !
I am sooo v thrilled after realising what it means !
It is amazing that you were picked on your first Hub. :-)
Tru tht @The Examiner , but tell me where can I most appear on the hub pages ??
The HubPages that I am familiar with is this link:
You see this page when you sign in and see the daily stories on it. I leave that page open all of the time and I open the other pages next to that one.
If you accidentally close that page then go to the top of your present page and to the left it says "HubPages". Right click on that and re-open it in a separate tab.
I published a hub...I can reach it both through my profile and application page but I can only see my version Iwant to see how it appears to public and the location ...can u plzzzz help?/
Just look on HubPages. That is also what 'Preview' is for when you are editing.
That's an extraordinary feat, congratulations. Your work is very original. I am looking forward to your upcoming hubs.
I only read the first one. Your sentence structure and grammar might need to improve a bit. Remember the capital letters as mentioned above, there are a few places missing comments, and also a few sentence fragments. I'm not trying to be mean, but sometimes articles are a little bit harder to read without proper use of the English language and proper grammar. If that's not your strongest suit, you could always hire someone to do it for you.
Thank you @Angel198625 for your inputs...I appreciate critics , and I totally agree with you that missing comments and framents make it ..difficult to read .. I believe I should add an audio to my hub that makes more sense ...tanx once again but I have a question to ask , you gave a critical review on my very first hub , but not one word of appreciation ,can I ask why so , is it that bad ?
No it isn't that bad. I think the content and photos are wonderful! The question asked what was wrong so I simply put what I thought might be wrong.
by Dr. John Anderson 8 years ago
The purpose of this post is NOT to moan and groan, but rather to better understand it, by sharing your insight and experiences. Obviously we now have to work using its parameters. Stayin' Alive Ha Ha Ha
by jagriti 4 days ago
Hello!I wrote my first article on Hub Pages and did not pass the QAP even after editing more than six times. I followed all the guidelines-1. Using more capsules2.proper title and summary3. full-length wide images3.checked my article grammar briefly4.Systematic order5.added in-depth knowledge of my...
by Chang Lee 4 years ago
Hi Hubbers,I'd like some help with passing the Quality Assessment Process. Will you please give feedback on my Hub Gift Inspiration - Themed with Doggie, Cat, Horse or Owl by Alex Clark (must be signed in to view). What can I do to improve? Thanks!Few more questions; 1. Are 5 featured hubs required...
by yellowbutterfly 5 months ago
Can someone tell me what is the 'hub score' please? It seems to have no relevance to the number of page views on my hubs.Thanks!yellowbutterfly
by Giselle Maine 8 years ago
Yesterday I went into edit mode on one of my non-featured (idled) hubs but DID NOT make a single change. (The reason I went in there was because I just wanted to look at my summary, which I can't do without going into edit mode). I did not do any typing whatsoever. To my surprise,...
by Shannon 6 years ago
I've spent an hour clicking through hubpages. I cannot find a list anywhere of what is required for a lens to be in compliance. Could someone please kindly share a link or list so that I can find out that info? Thank you so much!
Copyright © 2021 Maven Media Brands, LLC and respective content providers on this website. HubPages® is a registered trademark of Maven Coalition, Inc. Other product and company names shown may be trademarks of their respective owners. Maven Media Brands, LLC and respective content providers to this website may receive compensation for some links to products and services on this website.
|HubPages Device ID||This is used to identify particular browsers or devices when the access the service, and is used for security reasons.|
|Login||This is necessary to sign in to the HubPages Service.|
|HubPages Traffic Pixel||This is used to collect data on traffic to articles and other pages on our site. Unless you are signed in to a HubPages account, all personally identifiable information is anonymized.|
|Remarketing Pixels||We may use remarketing pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to advertise the HubPages Service to people that have visited our sites.|
|Conversion Tracking Pixels||We may use conversion tracking pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to identify when an advertisement has successfully resulted in the desired action, such as signing up for the HubPages Service or publishing an article on the HubPages Service.|