Hey HubPages Staff,
I cannot EDIT my Valentine's Day Hubs???????????????
This is a severe problem considering it needs to be published on SUNDAY!!!!!!!!!!!!!!!!!!!!!!!!!!!
I tried to edit the Hub 5 times and it keeps trying to load a hubtool/edit/ and for some reason, the error forces Windows IE to reset and reload, over and over again??????????????
Wow... A lot of punctuation marks... Have you restarted your browser? Cleared any cookies? Restarted the computer? I haven't had any problems today.
Side tip, you typically publish holiday stuff in advance for better SEO traffic.
It will not allow me to edit the hub.
It keeps running into an error in IE, and reloads the edit mode of the hub.
This is only effecting my Valentine's Day Hub.
I am able to edit others without a problem?
Oh that sucks, Cags! I hope that the staff reads this and get on the issue!
Yes it does. Because it is happening to my HUB #2 only.
I am able to edit other hubs, but not that one? I don't get it, it doesn't make anymore sense than the fact that I've still not received my newsletter and still receiving sporadic emails.
Only to the second one? Okay that is really weird..
if it makes you feel any better I still have to hit publish twice before it'll publish any of my hubs okay yea I know that isn't as big as your issue but still an issue so you aren't suffering alone
I published one yesterday after you mentioned that problem, and had to hit the button twice and so lost the opportunity to share it with twitter and facebook.
Haven't written never mind published another onesince!
send an email, maybe? they are usualy pretty quick to respond. Ive had something similar happen. I just had to shut my computer down, I tried again a few hours later and it was fine.
Just dont panic.
I have to panic. I don't have much time to work on the Hub #2 and every passing minute takes away from my chances to get it done on the deadline.
Just edited a different hub and editing working fine?????
Again, makes no sense??????
Edit: Just tried another hub to edit.....no problem?????
Cag's I hope they fix it soon, you've been working so hard at it.
Have you tried Firefox?
Do you actually manage to open the Hub to edit, or does it mess up before then?
Just asking because mine occasionally jams up whilst I am in edit mode - I copy the URL and paste it into another tab. That one then works just fine.
Absolutely no idea if that helps in the slightest, but you never know.
Best of luck - I know how much work you have put into this
No, I haven't and I shouldn't have to.
I've tried opening it in it's own window and tried opening it in a new tab.
IE keeps getting an error, when loading a hubtool/create/name during the edit mode.
I've done everything to change/fix the problem, but the error keeps coming, and when it does, it locks up for a few seconds and then tries to reload in the edit mode? It keeps going in circles?????????
Thank you Sufidreamer. Appreciate the help.
its a good suggestion to just try it with a different browser
Firefox, its like IE, except for it works rightand isnt riddled with security flaws and bloat
I just open 3 NEW tabs with other hubs, all different, then edited ALL 3 at once.
No problems with any of them?
So, IE cannot be the problem?
IE can always be the problem, it saves a lot of headaches in web browsing/publishing to just be able to pull up alternate browsers (firefox,chrome,opera) when necessary...its surprising how often it gets the job done...you dont always know why
and really IE just isnt as good as the others anymore
Sufis link is rather telling...bunches of people saying IE just doesnt work right!
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Timestamp: Mon, 8 Feb 2010 21:28:24 UTC
Message: Expected ';'
URI: http://hubpages.com/hub/Women-Writers-o … -Part-Deux
This is the error I am receiving, before I even edit the hub.
I hope this helps?
There is a little info here, Cags
http://social.answers.microsoft.com/For … d878664615
Cut and paste the error, without the timestamp, and run a Google search - you are not the only one to have the problem.
I skimmed through a couple of sites and they all suggested that things are fine with Firefox - I seem to remember that Firefox is the suggested browser for HP, although my memory is not the greatest
We are getting there - I am no techie, but we can blunder through this!
Thank you again Sufidreamer. However, I'm not using IE 8. I am using IE 7 that I'm aware of.
hehe - most of my post is now redundant!
It seems that your choices are:
Hunt on the Microsoft site for a patch
For things like this, I have two browsers - if one messes up, it is easy enough to switch between the two. I use Firefox, but it occasionally messes up, so I switch to IE or Chrome
Anyway, that is way beyond the limit of my techie knowledge. If we keep bumping this up, hopefully someone more knowledgeable will notice!
EDIT: Like Sunforged! Crossed posts, buddy
Thank you Sunforged.
I guess I'm just going to shutdown HubPages for the day. Maybe, I'll attack the problem tomorrow or some other time.
Should my hub not be published on time. Oh well.
Have a great day!
You are using IE7 on what operating system?
Alrighty, thanks Cags. I'll see what I can find out!
I looked at this a bit. I believe the cause is a combination of Internet Explorer and the shear number of capsules in the hub. I was able to edit without trouble in Firefox. In IE I saw that an error similar to what you are reporting, but was able to go ahead and edit the hub by just ignoring the error, although things were a bit slow. I doubt that I have exactly the same Internet Explorer configuration as you, so it's hard to recommend a precise remedy.
We don't enforce any strict limit on capsules, but depending on your browser and configuration things may become less stable starting around 100-150 capsules. If you don't want to use firefox, I'd suggest adding a part trois and quatre.
I guess I will simply delete the hub and start from scratch, as much as I hate to do that.
I get it about the 100-150 capsules, but I have no where near that many capsules even loaded into that hub.
I know I have about that many in Hub #1, but Hub #2 isn't anywhere near finished. So, I guess I'll figure out something.
Thank you for the help.
Cags, I love ya hon, so take the advice, load Firefox. It doesn't take much time and you'll enjoy your internet so much more. I was a hard core IE fan for years, after I tried Firefox, I don't even think twice about IE anymore.
My problem is ONLY on this one particular hub?
All other hubs are editing without a problem
Attention HubPages Staff, forget the problem
I am simply going to delete the hub and start over.
That seems to the only solution. The problem isn't effecting any of my published or unpublished hubs.
It's directly related to just my Valentine's Day Hub #2.
aaaa Cags! I'm sorry that you have to start all over again
I am still biding my time right now.
It just doesn't make any sense.
yea it definitely doesn't...it's too werid LOL
I tried to reproduce your issue. I was able to edit both of your hubs in both Firefox and IE 7.
I suspect that your problem has to do with an IE setting.
If you click Tools->Internet Options (Advanced Tab):
Make sure that that under the "Browsing Section":
You should have checked:
* Disable script debugging (Internet Explorer)
* Disable script debugging (Other)
That may be the issue that you are hitting.
Cags, I was a die-hard IE user as well, but I have switched to Firefox because it just has fewer problems with the Hub Pages editors et al.
I am finding it loads slower and I sometimes have to reboot, so it is certainly not perfect, but WAY fewer problems, especially with hubs that have similar titles - IE HATED my adventure series - that's when I switched, too.
Made no sense to me either, so if you find out what the hiccup is, let us know. In the meantime, hang in. We're all happy to wait for your Hub, my friend.
I've had a similar problem in the past, and all i did was shut down IE and go to Firefox. The problem did not surface on FF. And it was only a couple of hubs too. IE is problematic many times as far as i'm concerned.
Maybe I should just simply publish Hub #1. Make it an official hub and then try editing the other one.
I can only think that for some reason these two hubs might have something to do with the other one not working? Unsure about that.
Attention HubPages Staff,
Problem solved. I apparently had no choice but to switch to firefox in order to edit the hub.
Thank you for your help. It is greatly appreciated.
I guess I don't have a choice now but to make the switch. I don't have to like it, but did make the switch.
I love Firefox though I'm still learning it. I made the switch about six months ago after I started getting blue screen errors.
I'm still getting blue screen errors but Firefox will reload my pages exactly the way they were before the crash, even including half-written web emails!!
Don't remember IE ever offering that service!
Oh and glad you are sorted Cags
by Cagsil6 years ago
Hello,I try not to make waves with "How Hubpages Operates" and I am not sure if this singular problem is having a huge effect or not.But, I've noticed that many hubs I had connected to other hubs via...
by George Poe6 years ago
So, I may have just p**sed off a few of you loyal hubbers out there - I can live with it...Here are two emails I received this week (three days apart) after editing and revising one of my articles four or five times in...
by sam nomorr4 years ago
Yesterday I invited a friend to try the hubpages. She declined stating that most of the staff are narcissistic head hunters who have a degree in English, play head games with the users they don't like, are unfair in...
by Marcy Goodfleisch4 years ago
Dear Staff:First, this is intended to be a request made out of love for this site, and out of respect and regard for our fellow Hubbers.Please strongly consider removing the Hubber Score from our profiles. If you...
by Marisa Wright6 years ago
In the past many Hubbers, including myself, have seen the "Report a Problem" or "Need Help" threads as a way to either get a policy explained, or as a way to escalate an urgent problem when emails...
by Sheila Craan9 months ago
Lately, I have had 11 hubs unfeatured due to Quality Issues. I have assured my hubs do not contain grammatical or spelling errors. I have included relevant video and changed the titles and added new supporting texts and...
Copyright © 2017 HubPages Inc. and respective owners.
Other product and company names shown may be trademarks of their respective owners.
HubPages® is a registered Service Mark of HubPages, Inc.
HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.