jump to last post 1-4 of 4 discussions (5 posts)

how do you start an automatic invicta watch

  1. profile image49
    brentrogersposted 7 years ago

    how do you start an automatic invicta watch

  2. profile image0
    Butch Newsposted 7 years ago

    I don't know the watch so this is about all watches.  If it isn't running it has one of two problems.

    1.  It needs a new battery.  You need to take it to a watch shop and it will cost about $15-$20 to replace the battery for most watches.  Ask for an estimate first.

    2. It is damaged inside.  This may be too expensive to repair but you may be able to get an estimate by asking.

  3. profile image46
    ChaosTheoryposted 7 years ago

    Automatic watches do not need winding so if it doesn't start, look at the crown (winding stem) to make sure it's not pulled out. If it has a chronograph feature the second hand may only sweep when it is used in that mode. I have MANY Invicta watches and have never had trouble with them.

  4. etaCarinae profile image75
    etaCarinaeposted 3 years ago

    Make sure you remove the plastic from right underneath the external dial; then, the hands should start to move. At least, that's what I did with the Invicta watch I bought. http://pinstor.us/2014/04/22/quality-in … men-women/

    1. zaton profile image76
      zatonposted 10 months agoin reply to this

      You might have to remove the back cover - the batteries dead. alternately, you may just need to move your wrist enough to activate the motion-sensor if it's a true automatic. http://mensinvictawatches.tumblr.com/celebrity-watches

 
working