I cannot edit ANY of my hubs. I only noticed yesterday that everytime I try to edit my published hubs it comes with a message saying "something went wrong, try again".
Getting worst... cannot write any new hubs neither!!!!
I do get through all the stages and it stops working when I want to start editing the capsules.
You can't post comments, you can't edit groups........ I have been experiencing that problem. Do you see adsense ads?
1. Sign out of hubpages.
2. Do a dry boot of your pc by putting off the power from the mains/power source.
3. Start normally and login to hubpages afresh. It should work?
On 8th March 2009, I had asked hubpages the following but they did not answer:
"What settings do I need to change in my computer so that I can have the following:
1. Be able to see my hubs in "Groups" and be able to drag and drop?
2. Be able to post comments.
3. Be able to edit hubs.
4. Be able to see that a hub has a video (I have adobe flash player installed)
This system has been working well on Hpages in the past. Currently I am able to do the above mentioned by using another system running on the same IE software.
Regards and bye.
Hi Princessa, I too faced the same problem long time back. Actually page where we write new Hub uses some very heavy components and I guess it needs proper network speed. This to me when my network speed was very low once. So I had to make sure during those days that when I write a new Hub there was no other page being loaded or no download taking place. What is your network speed?
Hi Paperback: actually I have no idea. But I have not changed anything (speed, computers, services, nothing at all) It used to work ok until last week
I don't think anything from our end creates these kind of problem. It may be quite possible that your network speed has become really low and because of the you may not be able to create hubs. Look I am saying all these thing as per what I had experienced and the steps I took to solve the problem. It could be that the reason for you is not the network speed.
To make sure what your network speed is, you can try this "http://www.speedtest.net/"
Just go to this page click on the recommended server to test your Internet speed (the recommended server will be shown as a yellow or golden pyramid). Within minutes it will show you your download and upload speed. Let us see what it shows!
Sorry. I thought it should have. I've had that problem three times now and everytime I seem to fix it like that. The problem seems to normally starts when a hubpages' page hung and you hit ctrl+alt+del. I don't know.
Hi Princessa, I was wondering if there could be some other problem too. Maybe there is some problem in your browser setting! What browser are you using?
Could you please let me know in detail about exactly what are the places where you get struck and what is the exact message shown (if any). Maybe I will be able to help.
by Neha J 6 years ago
I was trying to publish a new hub. But I found that "Submit for Publication" button is not working.Other two buttons "Preview" and "Done Editing" is working but the middle button "Submit for Publication" is not working.I tried different browsers but not...
by Caren White 2 years ago
I am screaming with frustration! Most of my hubs have been unfeatured due to lack of traffic. I write about gardening which no one wants to read about in the winter. Spring is coming so I want to get my hubs featured again, but every time I try to edit them, I either get an error...
by Kelly Kline Burnett 7 years ago
I have been away due to a new position so forgive me, this probably has been addressed before.I have 6 hubs that have been unpublished and I am working hard to re-establish them.My question is - is this the beginning of a massive edit program that I must do?I appreciate the help and the...
by Joanna McKenna 7 years ago
To the powers that be at HP: this is getting OLD. What's the point of a writing site that won't let you edit, let alone publish, your work????? Seems to happen only on the weekends, and I'm 100% sure it IS NOT on my end. No Windows updates pending, cache has been emptied, system...
by Louise Barraco 3 years ago
Hi its Louise again, I was wondering if anyone knew how to edit your hubs so that they can be featured and how often you edit them. I am trying to make blogging into a part time job or full time job but don't know how to get paid doing so and I am a horrible editor of my own stuff. ...
by Donna Hilbrandt 4 years ago
Are you removing your "sign up for Hubpages" messages when you edit your hubs?When I went into edit mode on some of my hubs today, one of the "style recommendations" was to remove the sign up for Hubpages link that I put at the bottom of the article. I wonder if others are...
Copyright © 2018 HubPages Inc. and respective owners. Other product and company names shown may be trademarks of their respective owners. HubPages® is a registered Service Mark of HubPages, Inc. HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.
|HubPages Device ID||This is used to identify particular browsers or devices when the access the service, and is used for security reasons.|
|Login||This is necessary to sign in to the HubPages Service.|
|HubPages Traffic Pixel||This is used to collect data on traffic to articles and other pages on our site. Unless you are signed in to a HubPages account, all personally identifiable information is anonymized.|
|Remarketing Pixels||We may use remarketing pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to advertise the HubPages Service to people that have visited our sites.|
|Conversion Tracking Pixels||We may use conversion tracking pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to identify when an advertisement has successfully resulted in the desired action, such as signing up for the HubPages Service or publishing an article on the HubPages Service.|