jump to last post 1-5 of 5 discussions (8 posts)

edit published hub?

  1. dotnik profile image60
    dotnikposted 7 years ago

    I'd like to reduce a picture in a
    pubished hub and put it in the text
    of my hub rather than on top.
    Can I do this? If so, how?

    1. profile image0
      Website Examinerposted 7 years agoin reply to this

      There are two things you can do. In the image capsule, you can set the image size to full, half, or quarter. Secondly, if you have the image capsule on top of the text capsule, then you click on the --> arrow on the image capsule, then save the changes, what will happen is this: The image capsule will automatically align itself to the right side, and the text will move up, now appearing side by side with the image. I believe this is what you are trying to do.

  2. Niteriter profile image76
    Niteriterposted 7 years ago

    There is an "EDIT" tab at the top of your Hub. Simply click the tab and your Hub will go into edit mode.

  3. Mikel G Roberts profile image86
    Mikel G Robertsposted 7 years ago

    To the right of the text of your hub(in edit mode) is a list of your capsules... you can re-order the capsules there.

  4. profile image0
    Justine76posted 7 years ago

    Go to "my account" click on the hub in question. You should then see an "edit" button, click that. Now, your hub will look as it did when you were writing it, all in capsules, "text" and "photo" all seperated...click on the edit button of the photo you want to change.  smile

    1. dotnik profile image60
      dotnikposted 7 years agoin reply to this

      Thank you for the edit advice. Dotnik

      1. profile image0
        Justine76posted 7 years agoin reply to this

        good luck, hope it helps.

  5. nikipa profile image30
    nikipaposted 7 years ago

    I usually edit my hubs quite often.