RSS capsule and FeedBurner

1. 72

   Inspirepubposted 15 years ago

   Hi guys,
   
   We recently switched one of my blog's RSS feed to FeedBurner.
   
   It seems that HubPages RSS capsules spit the dummy over the redirect.
   
   My original blog feed URL was http://raisingentrepreneurs.org/blog/feed.
   
   We have set it up to divert to http://feeds.feedburner.com/raisingentrepreneurs/feed, using the FeedBurner FeedSmith plugin for WordPress.
   
   We tested a range of readers -  two of the RSS reader widgets on iGoogle, Thunderbird RSS reader, Google Reader, and the RSS reader on MyYahoo, and they all found the feed with no problems.
   
   However, the HubPages RSS capsule thinks it's not a valid RSS feed.
   
   Please tell me I don't have to go and change the URL in every RSS capsule on all my related  Hubs ...?
   
   Jenny

   replyreport
2. 76

   DJ Funktualposted 15 years ago

   and after we answer her question, can we dumb it down so i can learn what an RSS feed is.  I've been wondering but afraid to ask.

   replyreport
3. 72

   Inspirepubposted 15 years ago

   Check out my Hub, honey!
   
   http://hubpages.com/hub/How-To-Use-An-RSS-Feed
   
   Should be just about everything a Hubber needs ...
   
   Jenny

   replyreport
   1. 60

      Rhythm City Prod.posted 15 years agoin reply to this

        Thanks Jenny!  I can't get there from work cause I'm blocked but I'll check it out when I get home.  Good Luck

      replyreport
4. 59

   Mark Knowlesposted 15 years ago

   I also have trouble producing feedburner feeds in RSS capsules. Not just at hubpages.
   
   Did it work before you switched to feedburner?

   replyreport
   1. 72

      Inspirepubposted 15 years agoin reply to this

      Like a dream - not a single problem ever.
      
      But HubPages has been my only problem so far. I am about to start experimenting with a whole lot more as part of promoting my blog, so I will keep  you posted if I hit any further problems.
      
      Jenny
      
      P.S. Paul? Any hints?

      replyreport
5. 72

   Inspirepubposted 15 years ago

   *bump*
   
   Now I am really worried. I went to update the RSS URL in one of my Hubs from my former URL to the FeedBurner one, and it instantly displayed the "Overly Promotional" warning.
   
   Take out the RSS feed URL, and the warning goes away.
   
   And no, I don't already have two other links to FeedBurner on that Hub!
   
   It looks like the FeedBurner links in the RSS feed are each being counted separately somehow.
   
   So now I have to choose between having "this does not appear to be a valid feed" displaying, or having the feed articles there but tolerating a big fat warning sign whenever I visit my Hubs, or just removing the RSS feeds from all my Hubs (not a good idea from SEO and traffic point of view).
   
   Guys, what is the solution here? Surely HubPages and FeedBurner can be made compatible?
   
   Jenny

   replyreport
   1. 71

      Peter M. Lopezposted 15 years agoin reply to this

      You would think.  I have encountered this before, too.  I guess I should have asked back then, but I just stopped using the Feedburner feed.
      
      Can you still use your blog's direct feed, or not?

      replyreport
6. 72

   Inspirepubposted 15 years ago

   *bump*
   
   Please, guys?

   replyreport
7. 63

   Mishaposted 15 years ago

   Jenny, I would be glad to help, but I don't know
   
   I hope Paul or Maddie will clarify...

   replyreport
8. 72

   Inspirepubposted 15 years ago

   The direct feed works, but I can't use it when I have a diversion in place to FeedBurner.
   
   I may need to set up a mirror blog, use RSS-to-blog to populate it, and use that one instead. It just seems insane to have to do that.
   
   FeedBurner is BIG, which means HubPages really should work with it.
   
   Jenny

   replyreport
9. 58

   creditmeposted 15 years ago

   I'm having the same problem. All my Feedburner RSS feeds to my blogs used to work, but now they don't. Should this be reported as a bug?

   replyreport
10. 72

    Inspirepubposted 15 years ago

    That's what this thread is doing - reporting it as a bug.
    
    You could try emailing as well, because I haven't seen any comment on this issue from Paul or Jason, so they may have missed the topic.
    
    Jenny

    replyreport
11. 59

    jamesburchillposted 15 years ago

    I set my hubs up with feedburner from the start and all was well. Everything worked. It all fed nicely.
    
    I've noticed in the last week or so (not been checking too frequently) that now my feeds are not valid.
    
    Therefore from my position I'd say this is a hubpages issue.
    
    jb

    replyreport
12. STAFF

    pauldeedsposted 15 years ago

    We're looking into this.  Thanks.

    replyreport
13. 76

    Lissieposted 15 years ago

    I have the same problem - I found that the feedburner RSS feed worked fine initially- for when I initially posted the hub and several hours later - now its gone - with the wrong format message in the RSS capsule

    replyreport
14. STAFF

    pauldeedsposted 15 years ago

    I may have solved this problem.  If you're still having trouble please send me a link to a hub that has currently broken RSS feed that you think should work.  Thanks!

    replyreport
    1. 76

       Lissieposted 15 years agoin reply to this

       
       
       Mine seems to be working fine  Paul - I'll send u an email if it stops! Thanks

       replyreport
15. 72

    Inspirepubposted 15 years ago

    The RSS feed I use as an example in my Hub
    
    http://hubpages.com/hub/How-To-Use-An-RSS-Feed
    
    is still not working properly, and hasn't since we switched it to FeedBurner.
    
    Other RSS readers don't have a problem with it - only HubPages.
    
    Jenny

    replyreport
    1. STAFF

       pauldeedsposted 15 years agoin reply to this

       Ok, I see the problem there.  The URL you used in the capsule:
       
       http://raisingentrepreneurs.org/blog/feed/
       
       redirects to this url:
       
       http://feeds.feedburner.com/raisingentrepreneurs/feed
       
       The code we use to fetch the RSS will not follow redirects.  We may fix this eventually, but there is an easy work around  -- just use the second url in the RSS capsule.

       replyreport
16. 72

    Inspirepubposted 15 years ago

    Thanks Paul, that's right - that is the problem I was reporting. RSS capsule not following redirects.
    
    This means that any time any RSS feed used by any person in any Hub changes to FeedBurner, it will become invalid. And we are not notified when it happens - I only noticed because someone left a comment on my RSS Hub. I saw the "invalid" error when I went to the Hub respond to the comment. Otherwise, I would never have known the feed had stopped working.
    
    It also means that unless people are very IT literate, they will simply be unable to use FeedBurner redirect feeds in Hubs, because they won't know how to track down the FeedBurner URL to make the capsule work.
    
    If there is no fix coming, I now need to go back through 44 Hubs related to that topic, because I can't remember how many of them and which ones actually use that feed, and check them all manually, and change the ones that use it.
    
    I was hoping not to have to do that.
    
    How long is it likely to be before the RSS capsule can deal with redirects?
    
    Jenny

    replyreport